Navigation


IJENS IMPACT FACTOR

IMPACT FACTOR calculated from CITATION REPORTS through GOOGLE SCHOLAR.

Articles included from 2009-2019.

  • International Journal of Engineering & Technology IJET-IJENS IMPACT FACTOR = 1.272 [Year 2019]
  • International Journal of Basic & Applied Sciences IJBAS-IJENS IMPACT FACTOR = 1.220 [Year 2019]
  • International Journal of Electrical & Computer Sciences IJECS-IJENS IMPACT FACTOR = 1.428 [Year 2019]
  • International Journal of Civil & Environmental Engineering IJCEE-IJENS IMPACT FACTOR = 1.299 [Year 2019]
  • International Journal of Video&Image Processing&Network Security IJVIPNS-IJENS IMPACT FACTOR=2.406 [Year 2019]
  • International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS IMPACT FACTOR = 1.210 [Year 2019]

Also IJENS Journals so far not included in ISI Knowledge of Web Indexes and HEC Recognized Journals List.

IJET: International Journal of Engineering and Technology

A = 3005 = The number of times articles published in 2009-2019

B = 2362 = The total number of citable items published by that journal in 2009 - 2019.

IJET-IJENS 2019 IMPACT FACTOR = A/B = 3005/2362 = 1.272

Title

Top 20 IJET Cited Articles

Cited By Year
Water quality monitoring system using zigbee based wireless sensor network 108 2009
Mobile application and its global impact 102 2010
Fixed-bed column study for Cu (II) removal from aqueous solutions using rice husk based activated carbon 80 2011
Remote monitoring in agricultural greenhouse using wireless sensor and short message service (SMS) 63 2009
A proposed test case generation technique based on activity diagrams 57 2011
Trends and issues to integrate ICT in teaching learning for the future world of education 52 2011
Effect of preparation conditions of activated carbon prepared from rice husk by ZnCl2 activation for removal of Cu (II) from aqueous solution 47 2010
TQM practices & organizational performance: evidence from Pakistani SMEs 44 2010
Pitch angle control of variable low rated speed wind turbine using fuzzy logic controller 41 2010
Phytochemical analysis and mineral elements composition of Ocimum basilicum obtained in JOS METROPOLIS, Plateau state Nigeria 39 2011
A comparitive study on silk dyeing with acid dye and reactive dye 37 2011
Performance evaluation of bamboo reinforced concrete beam 36 2011
Industrial pollution and implication on source of water supply in Kano, Nigeria 34 2010
Improved electrical conductivity of polyvinyl alcohol/multiwalled carbon nanotube nanofibre composite films with MnO2 as filler synthesised using the electrospinning process 30 2011
Effects of pressure and temperature on well cement degradation by supercritical CO2 30 2010
Removal of Cu (II) from water by adsorption on chicken eggshell 29 2013
Measuring hospital’s units efficiency: A data envelopment analysis approach 28 2011
Application of lean manufacturing to improve the performance of health care sector in Libya 28 2010
Integrating GIS and MCDM to deal with landfill site selection 27 2010
Adsorptive removal of Cu (II) using activated carbon prepared from rice husk by ZnCl2 activation and subsequent gasification with CO2 26 2011
IJBAS: International Journal of Basic and Applied Sciences

A = 2354 = The number of times articles published in 2009-2019.

B = 1929 = The total number of citable items published by that journal in 2009-2019.

IJBAS-IJENS 2019 IMPACT FACTOR = A/B = 2354/1929 = 1.220

Title

Top 20 IJBAS Cited Articles

Cited By Year
Website quality and consumer online purchase intention of air ticket 140 2009
Preparation of chitosan from shrimp shell and investigation of its properties 135 2011
Effect of experimental parameters on the morphology of electrospun Nylon 6 fibres 100 2010
Risk analysis method: FMEA/FMECA in the organizations 83 2011
Biodegradable polymers and their bone applications: a review 74 2012
Increasing biogas production rate from cattle manure using rumen fluid as inoculums 60 2013
Defining and measuring competitiveness: a comparative analysis of Turkey with 11 potential rivals 58 2012
Effects of polluted water irrigation on environment and health of people in Jamber, District Kasur, Pakistan 56 2010
On some stochastic fractional integro-differential equations 46 2006
Synthesis and characterization of Manganese doped ZnO nanoparticles 45 2011
Study of water quality and heavy metals in soil & water of ex-mining area Bestari Jaya, peninsular Malaysia 40 2010
Effect of temperature on ceramic from rice husk ash 39 2009
Adsorption equilibrium of malachite green dye onto rubber seed coat based activated carbon 38 2011
Electrical energy crisis in Pakistan and their possible solutions 33 2011
Using a complex transformation to get an exact solutions for fractional generalized coupled MKDV and KDV equations 32 2013
Solving TSP problem by using genetic algorithm 30 2009
Studies on mycelial growth requirements of Pleurotus ostreatus (Fr.) Singer 29 2010
Direct spectrophotometric determination of L-ascorbic acid in pharmaceutical preparations using sodium oxalate as a stabilizer 28 2011
Critical evaluation of dry spell research 27 2011
Progress in Business Intelligence System research: A literature Review 26 2011
IJECS: International Journal of Electrical and Computer Sciences

A = 1270 = The number of times articles published in 2009-2019.

B = 889 = The total number of citable items published by that journal in 2009-2019.

IJECS-IJENS 2019 IMPACT FACTOR = A/B = 1270/889 = 1.428

Title

Top 20 IJECS Cited Articles

Cited By Year
Information security management system standards: A comparative study of the big five 130 2011
Network routing protocol using genetic algorithms 61 2010
Best practices in E government: A review of some Innovative models proposed in different countries 56 2012
Automation of irrigation system using ANN based controller 40 2010
Development of a cell phone based remote control system: an effective switching system for controlling home and office appliances 37 2009
An Arabic web-based exam management system 36 2010
Efficient integrity checking technique for securing client data in cloud computing 33 2011
Satellite link design: A tutorial 31 2011
ANFIS based classification model for heart disease prediction 29 2014
An experimental comparative study on thyroid disease diagnosis based on feature subset selection and classification 29 2012
Arabic discourse segmentation based on rhetorical methods 29 2011
Control the extension time of traffic light in single junction by using fuzzy logic 27 2010
Optimized selection sort algorithm is faster than insertion sort algorithm: a comparative study 22 2011
Clipping based PAPR reduction method for LTE OFDMA systems 22 2010
Explicit rate-based congestion control for multimedia streaming over mobile ad hoc networks 22 2010
Advanced carrier based pulse width modulation in asymmetric cascaded multilevel inverter 21 2010
GUI based mamdani fuzzy inference system modeling to predict surface roughness in laser machining 21 2009
Test case generation and test data extraction techniques 20 2011
Low voltage ride through strategies for SCIG wind turbines interconnected grid 20 2011
Studying main differences between android & linux operating systems 17 2012
IJCEE: International Journal of Civil and Environmental Engineering

A = 1197 = The number of times articles published in 2009-2019.

B = 921 = The total number of citable items published by that journal in 2009-2019.

IJCEE-IJENS 2019 IMPACT FACTOR = A/B = 1197/921 = 1.299

Title

Top 20 IJCEE Cited Articles

Cited By Year
Effect of nano-clay on mechanical properties and microstructure of ordinary Portland cement mortar 97 2010
Strength activity index and microstructural characteristics of treated palm oil fuel ash 52 2011
Design with nature: windcatcher as a paradigm of natural ventilation device in buildings 44 2010
Effect of elevated temperature on mechanical properties and microstructure of silica flour concrete 44 2010
Comparison of acoustic emission activity in steel-reinforced and FRP-reinforced concrete beams 38 2000
Traditional Islamic-Arab house: vocabulary and syntax 36 2010
Framework for evaluating quality performance of contractors in Nigeria 36 2010
Strength characteristics of geopolymer concrete containing recycled concrete aggregate 30 2011
An experimental investigation on mechanical behavior of macro synthetic fiber reinforced concrete 29 2011
Water quality index of Perlis river, Malaysia 27 2013
Geotechnical assessment of road failures in the Abakaliki area, southeastern Nigeria 26 2011
Evaluation of different conditions on the mixing bitumen and carbon nano-tubes 23 2012
Selecting optimum locations of rainfall stations using kriging and entropy 23 2012
Chloride-ion impermeability of self-compacting high volume of fly ash concrete mixes 23 2011
Formation of hydraulic jumps on corrugated beds 23 2010
Particle swarm optimization feedforward neural network for hourly rainfall-runoff modeling in Bedup Basin, Malaysia 20 2010
Bending strength properties of glued laminated timber from selected Malaysian hardwood timber 19 2011
The effect of water content change and variation suction in behavior swelling of expansive soil 19 2011
Numerical analysis for progressive collapse potential of a typical framed concrete building 19 2010
Assessment of vehicular pollution of road side soils in Ota Metropolis, Ogun State, Nigeria 17 2012
IJVIPNS: International Journal of Video and Image Processing and Network Security

A = 917 = The number of times articles published in 2009-2019.

B = 381 = The total number of citable items published by that journal in 2009-2019.

IJVIPNS-IJENS 2019 IMPACT FACTOR = A/B = 917/381 = 2.406

Title

Top 20 IJVIPNS Cited Articles

Cited By Year
A structural analysis of complex aerial photographs 407 2013
Efficiency analysis and security evaluation of image encryption schemes 93 2010
Automated oil palm fruit grading system using artificial intelligence 34 2011
Feature level fusion of Palm veins and signature biometrics 32 2012
Enhancement of bone fracture image using filtering techniques 27 2009
Comparative study of authentication techniques 23 2010
Pointing error in FSO link under different weather conditions 20 2012
Development of algorithm tuberculosis bacteria identification using color segmentation and neural networks 18 2012
Comparative study: The evaluation of shadow detection methods 18 2010
MRI brain images segmentation based on optimized fuzzy logic and spatial information 16 2011
Novel colors correction approaches for natural scenes and skin detection techniques 16 2011
A Survey of botnet Technology and Detection 13 2010
Intelligent Adaptive Intrusion Detection Systems Using Neural Networks (Comparative study 13 2010
Range estimation in disparity mapping for navigation of stereo vision autonomous vehicle using curve fitting tool 13 2009
Low Memory Set-Partitioning in Hierarchical Trees Image Compression Algorithm 12 2013
Automatic Ear Recognition System using Back Propagation Neural Network. 12 2011
Robust digital image steganography within coefficient difference on integer haar wavelet transform 11 2014
Medium Access Control Protocol for Wireless Sensor Network–a Survey 11 2011
A blind wavelet-based digital watermarking for video 11 2009
Application of texture analysis in the assessment of chest radiographs 11 2009
IJMME: International Journal of Mechanical and Mechatronics Engineering

A = 1180 = The number of times articles published in 2009-2019.

B = 975 = The total number of citable items published by that journal in 2009-2019.

IJMME-IJENS 2019 IMPACT FACTOR = A/B = 1180/975 = 1.210

Title

Top 20 IJMME Cited Articles

Cited By Year
The effect of sliding speed and normal load on friction and wear property of aluminum 123 2011
Biodiesel from Jatropha oil as an alternative fuel for diesel engine 63 2010
Autonomous robots for agricultural tasks and farm assignment and future trends in agro robots 41 2013
Photogrammetric grading of oil palm fresh fruit bunches 38 2009
Grain refinement of Al–Si alloys by Nb–B inoculation. Part II: application to commercial alloys 30 2015
Experimental and theoretical studies of mechanical properties for reinforcement fiber types of composite materials 29 2012
Influence of graphite and machining parameters on the surface roughness of Al-fly ash/graphite hybrid composite: a Taguchi approach 28 2013
Review of research on vehicles aerodynamic drag reduction methods 26 2014
Implementation of total productive maintenance and overall equipment effectiveness evaluation 26 2013
A robust nonlinear control approach for tip position tracking of flexible spacecraft 25 2011
Experimental investigation of the dynamic characteristics of laminated composite beams 25 2010
Program suite for conceptual designing of parallel mechanism-based robots and machine tools 23 2013
Design, simulation and experimental of the very low head turbine with minimum pressure and freevortex criterions 23 2011
Characterization of palm kernel shell powder for use in polymer matrix composites 22 2012
Design, fabrication and experimental study of a novel two-axis sun tracker 22 2010
Finite element modeling of carbon nanotubes 19 2010
Production of diesel fuel from used engine oil 19 2010
Effects of canola biodiesel on a DI diesel engine performance and emissions 18 2013
Structural and optical properties of plasma polymerized pyromucic aldehyde thin films 17 2012
Influence of processing parameters and sintering atmosphere on the mechanical properties and microstructure of porous 316L stainless steel for possible hard-tissue applications 17 2012

 



IJENS MENU


Archive


Call For Papers